1. 32 bit walking 1's and 0's pattern (32bALT)

FF FF FF FF 00 00 00 00 FF FF FF FF 00 00 00 00 ...


2. 64 bit walking 1's and 0's pattern (64bALT)

FF FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 ...


3. Jitter Tolerance Pattern  (JTPAT)

7E 7E 7E 7E 7E 7E .... repeated > 167 times followed by

B5 B5 B5 B5 B5 B5 .... repeated > 50 times


4. 8 bit marching 1 (8bMAR1)

01 02 04 08 10 20 40 80 ...


5. 16 bit marching 1 (16bMAR1)

0001 0002 0004 0008 0010 0020 0040 0080 0100 0200 0400 0800 1000 2000 4000 8000 ...


6. 32 bit marching 1 (32bMAR1)

00000001 0000002 00000004 00000008 00000010 00000020 00000040 00000080 ...


7. 64 bit marching 1 (64bMAR1)

000000000000001 0000000000000002 0000000000000004 0000000000000008 ...


8. 8 bit marching 0 (8bMAR0)

FE FD FB F7 EF DF BF 7F ...


9. 16 bit marching 0 (16bMAR0)

FFFE FFFD FFFB FFF7 FFEF FFDF FFBF FF7F FEFF FDFF FBFF F7FF EFFF DFFF BFFF 7FFF ...


10. 32 bit marching 0 (32bMAR0)

FFFFFFFE FFFFFFFD FFFFFFFB FFFFFFF7 FFFFFFEF FFFFFFDF FFFFFFBF FFFFFF7F ...


11. 64 bit marching 0 (64bMAR0)

FFFFFFFFFFFFFFFE FFFFFFFFFFFFFFFD FFFFFFFFFFFFFFFB FFFFFFFFFFFFFFF7 FFFFFFFFFFFFFFEF FFFFFFFFFFFFFFDF FFFFFFFFFFFFFFBF ...

12. Scrambled Jitter Pattern (SJPAT)

Per T11 06-787v0 technical draft.  This is a modified version which differs in two key areas:  1.)  The pattern is repeated until it fills the buffer size selected and 2.)  Valid fibre channel headers are used vs. using the 24 byte header for data.  As a third party vendor application, it's impossible for DataMover to modify fibre channel frame formatting and if it were done, the frame would not be recognizable to another fibre channel device or fabric.

13. Jitter Test Scrambled Pattern (JTSPAT)

Per T11 06-655v1 technical draft.  This is a modified version which differs in two key areas:  1.)  The pattern is repeated until it fills the buffer size selected and 2.)  Valid fibre channel headers are used vs. using the 24 byte header for data.  As a third party vendor application, it's impossible for DataMover to modify fibre channel frame formatting and if it were done, the frame would not be recognizable to another fibre channel device or fabric.